Preventive Maintenance: A Practical Guide for Any Business
Fixing things only when they break is the most expensive way to run maintenance. Here is how to move to planned, preventive maintenance without drowning in paperwork.
In short: preventive maintenance means servicing assets on a schedule, before they fail. Plans can run on time (every three months) or on usage (every 250 hours or 10,000 km). Start with the assets that stop your business when they break, and let software create the work when it falls due.
What is preventive maintenance?
Preventive maintenance (PM) is planned work done to keep an asset running: servicing, lubrication, filter changes, adjustments and checks. The opposite is reactive maintenance, where work only happens after a breakdown. Most businesses do some of both, but the more of your maintenance is planned, the fewer surprises you get.
Why it pays off
- Fewer breakdowns: worn parts are replaced before they fail.
- Lower costs: planned work avoids call-out rates, rushed parts and overtime.
- Work done when it suits you: outside peak hours, with the parts ready.
- Longer asset life: equipment serviced on time lasts longer and is worth more.
- Safer workplaces: fewer failures of vehicles, lifting equipment and machinery.
Time based or usage based?
| Plan type | Best for | Example |
|---|---|---|
| Time based | Assets that age whether used or not, and anything with a set inspection interval | Air conditioning service every 3 months; fire equipment check every 6 months |
| Usage based | Assets that wear with use | Forklift service every 250 hours; vehicle service every 10,000 km; machine service by cycles or meter reading |
Usage based plans need a meter reading, such as hours run or kilometres, recorded regularly. The payoff is that busy assets get serviced more often and quiet ones are not over-serviced.
How to start: five steps
- List your critical assets. Which assets stop production, deliveries or sales when they fail? Start there.
- Use the manufacturer's schedule. The manual usually tells you what to service and how often.
- Write short task lists. Five to ten clear tasks per plan are easier to follow than a long manual.
- Choose time or usage for each plan, and record meter readings where you use usage based plans.
- Review after three months. If an asset still breaks down, shorten the interval or add a task. If nothing is ever found, lengthen it.
Common mistakes
- Planning everything at once: start with ten critical assets, not five hundred.
- Plans nobody sees: a schedule in a spreadsheet is easy to forget. The work needs to arrive as a job someone is assigned to.
- Not recording what was found: without notes and photos, you cannot tell whether the plan is working.
How Infinity2X CMMS automates preventive maintenance
In Infinity2X CMMS, a preventive maintenance plan can be time based or usage based, by hours run, kilometres or any meter reading, and repeats automatically. When a plan falls due, Infinity2X CMMS creates the preventive work order with its task list ready to tick off, on the web or the iOS and Android app. Parts and time are recorded on the job, and the maintenance dashboard shows open, overdue and completed work, so you can see your PM compliance at a glance.
Try Infinity2X CMMS Free
Register your assets, plan maintenance and run your first inspection. Start a free trial, or book a demo using your own assets and sites.
Start Free Trial Request a Demo