Getting Glass Edge Work Right, Every Time
Edge work looks simple on a quote, but it changes the cut size, the price and the route through the factory. Mistakes mean undersized panels and remakes.
In short: Infinity2X GlassOne records edge work and other processing on each glass line, prices it correctly, and makes sure the panel visits the right station in the factory, so finished glass comes out the size the customer ordered.
Why edge work causes remakes
Polishing or grinding an edge removes glass. If the cutting team does not allow for it, the finished panel is undersized. Different edge types work different sides of the panel, so the allowance changes from job to job. When this lives in someone's head, mistakes are expensive.
How Infinity2X GlassOne helps
- Standard edge types: set up the edge work you offer once, such as all round or two sides, and choose it on the order.
- Allowances recorded: keep your cutting allowances with each edge type, so the knowledge is in the system, not in one person's head.
- Priced to match: edge work, holes and other processing are priced to suit the glass they are applied to.
- Routed automatically: panels with edge work are sent to the right station after cutting, with no extra paperwork.
The result
- Fewer undersized panels and remakes
- Consistent processing charges
- New staff get it right sooner
Edge types in plain words
Most glass businesses offer a handful of standard edge finishes: arrised (or seamed) edges that take the sharpness off, flat ground edges, and flat polished edges for exposed glass such as balustrades, shelves and splashbacks. Some edges are worked on all four sides, some on two, and some only where the glass will be seen. Each finish removes a little glass and takes a different amount of machine time, which is why it affects both the cutting size and the price.
Where the allowance goes wrong
The most common remake in edge work is an undersized panel. The customer orders 900 by 1200 finished, the cutting team cuts 900 by 1200, the edger takes a millimetre or two off each polished side and the panel no longer fits. The opposite happens too: an allowance added to sides that are not being worked, leaving a panel oversized. The fix is not a better memory. It is recording the allowance with each edge type, so the right cut size is used every time, whoever is on shift.
Pricing edge work fairly
Edge work is usually priced by the length of edge worked, and it should cost more on thicker or laminated glass, which takes longer to process. Holes, cut-outs and other processing add to the job too. When these are priced from your rules rather than worked out by hand, every customer is charged consistently and processing stops being the place where margin quietly disappears.
Reading processing straight from the customer's drawing
Customers increasingly send a PDF with a drawing showing edges and holes. With AI order entry in Infinity2X GlassOne, the processing is read from the drawing and priced, so your team checks the order instead of re-typing it.
A quick checklist for your edge work setup
- List the edge finishes you actually sell, and retire the ones you never use.
- Record which sides each finish applies to and the allowance for each glass thickness.
- Set processing prices that reflect machine time on thicker glass.
- Make sure every panel with edge work is routed to the right station after cutting.
Frequently asked questions
Can we add our own edge types?
Yes. You set up the edge work you offer once, with its allowances and pricing, and choose it on the order.
Does the factory see the edge work on the panel?
Yes. Panels with edge work are sent to the right station after cutting, and the details print on the glass label.
See It With Your Own Glass
Book a personalised demo of Infinity2X GlassOne using your own products, customers and workflow. Plans start at $150 AUD per user per month, with up to 12 production users free.
Request a Demo View Pricing