Equipment Inspections: Checklists, Compliance and Proof
Forklifts, vehicles, racking, lifting gear and building plant all need regular checks. Here is how to run inspections that are quick for the team and easy to prove later.
In short: good inspections use a short checklist for each type of asset, record every task as passed, failed or N/A, turn failures into repair jobs, and keep the record where you can find it. Software lets a technician inspect a whole site in one visit and lets managers see which sites are up to date.
Why inspections matter
Regular inspections catch damage and wear before they cause an accident or a breakdown. Many assets, such as forklifts, lifting equipment, racking, vehicles and electrical equipment, are expected to be checked regularly, and after an incident the first question is usually: when was it last inspected, and by whom?
What a good inspection checklist looks like
- One checklist per asset type: a forklift checklist is different from a racking checklist.
- Short and specific: “Check tyres for cuts and wear” is better than “Check vehicle”.
- Passed, failed or N/A for every task, with a comment and photo when something fails.
- Who inspected, and who signed off, with the date.
- The next due date, set automatically from the interval for that asset type.
From paper to proof: what changes
| Paper or spreadsheets | Inspection software | |
|---|---|---|
| Finding the record | Folders, drawers and email | On the asset, in seconds |
| Knowing what is due | Someone has to remember | Due badges and overdue lists |
| Failed items | A note that may get lost | A work order raised from the failure |
| Many sites | Ring each site and ask | One dashboard for every site |
Inspect a whole site in one visit
When a site has dozens of similar assets, raising a separate job for each one wastes time. A better approach is a batch: pick the site, tick every asset being inspected today, and work through each asset's checklist. The inspections are saved together, with one sign-off for the visit.
Close the loop on failures
An inspection only reduces risk if failures get fixed. Every failed item should become a repair job with the fault, cause and fix recorded, and the asset should show as needing repair, or out of service, until it is done.
How Infinity2X CMMS helps
Infinity2X CMMS sets inspection checklists once per asset type, and every inspection starts with them. Technicians mark each task passed, failed or N/A with comments, on the web or the iOS and Android app. Batch inspections let you tick every asset at a site and inspect them in one go, with who inspected and who authorised recorded and the next due dates set for you. Failed assets get work orders, and the compliance dashboard shows each site as OK, due soon, overdue or never inspected, with pass rates, and prints to PDF for management reports. Service contractors can also inspect assets at their customers' sites.
Try Infinity2X CMMS Free
Register your assets, plan maintenance and run your first inspection. Start a free trial, or book a demo using your own assets and sites.
Start Free Trial Request a Demo